12/24-Hour Time Format; Alarm; Snooze (Snooze); Temperature Unit - Auriol 4-LD5380 Instructions Manual

12/24-hour time format

Press the SET-button 32 1 x long and 2 x short in normal time display mode. The 12- or
24-hour time format will blink and can be set by pressing the
down-button 26. In 12 hour time format the display will show the AM-Symbol 22
before noon and the PM symbol 22 after noon. Press the SET button 32 repeatedly to
return to normal time display mode.

Alarm

The radio-controlled weather station has an alarm feature. The pre-set
alarm time is 06:00 o'clock. To activate or deactivate the alarm time,
press the ALM-button 31 on the back side of the radio-controlled
weather station. The display will switch to the alarm time display and show the words
ALARM OFF and ALARM ON to indicate whether the alarm feature is on or off. Press the
up-button 25 to activate the alarm. Press the
alarm. If the alarm feature is activated, the bell symbol 7 will appear on the display. If the
alarm feature is deactivated, the bell symbol 7 will disappear from the display.
To change the alarm time, first press the ALM-button 31 briefly. Then press and hold the
ALM-button 31 for 3 seconds until setting mode is activated. The hours will blink on the
display and can be set by pressing the
Confirm your setting by pressing the ALM-button 31. Set the minutes in the same way.
After setting the minutes, the display will automatically return to the normal time display.

Snooze (SNOOZE)

Press the SNOOZE/LIGHT-button 4 when the alarm sounds to briefly deactivate the
Z
alarm. The bell symbol 7 and the Z
the alarm will sound again. Press any button except the SNOOZE/LIGHT-button 4 to
turn the alarm off. The alarm will remain activated for the following day.

Temperature unit

Press the down-button 26 in normal time display mode to select the temperature unit
Celsius (°C) or Fahrenheit (°F).

Trends

Your radio controlled weather station can show trends 10 for the weather data values
temperature and humidity for the station and the sensors 1-3.
Humidity/temperature rising
Humidity/temperature steady
Humidity/temperature falling

Maximum and minimum values

The radio-controlled weather station begins to record the maximum and minimum
temperature and humidity values when the batteries are inserted.
Press the up-button 25 briefly to show the maximum values
humidity of the station 19 and the sensors 1-3 on the display 12.
Briefly press the up-button 25 repeatedly to show the minimum value
temperature and humidity of the station 19 and the sensors 1-3 on the display 12.
To delete the maximum and minimum values, press and hold the
seconds. The stored values are deleted and the radio-controlled weather station will
begin to record new values.
up-button 25 or the
down-button 26 to deactivate the
up-button 25 or the down-button 26.
symbol 3 will blink on the display. After 5 minutes,
for temperature and
up-button 25 for 3
- 8 -
for the