In order to correct any deviations from the exact time, the clock is automatically
synchronised with the DCF radio signal every day at 1:00, 2:00 and 3:00.
Reception of the DCF radio signal can also be started manually on the weather station.
Press the + and – button
to receive the DCF radio signal. This process takes several minutes and is indi-
cated in the LC display by a flashing radio tower symbol.
If the connection with the DCF radio signal cannot be established, the search is stopped.
Note: If the clock of the weather station cannot receive the DCF radio signal due
to errors, too great a distance from the transmitter or similar reasons, it is possible
to set the time manually. If reception of the DCF signal is successful, the manual
settings are overwritten.
Setting the 12 / 24 hour mode / °C / °F / hPa / inHg /
time zone / time / date / language manually
The reception of DCF radio signal where the weather station has been positioned may
become degraded or interrupted. If this happens you can set the device manually.
Follow these steps:
1. Press and hold down the MODE button
blinks in the display. Press the + or – button
54 GB/IE
,
at the same time. The weather station attempts
35
36
for about 3 seconds. "12 Hr" or "24 Hr"
34
,
35
to choose the desired hour format.
36