Table of Contents
Advertisement
2-3
Basic safety
information
www.maxcessintl.com
SAFETY INSTRUCTIONS
Proper use
The load cell devices are intended to be used on machines or
systems to monitor the tension in a web.
Indoor operation.
Improper use
Operation outside the technical specifications
Operation in an Ex-area or intrinsically safe area, unless used
with a MAGPOWR IS2 barrier.
Any other use than the proper use shall be deemed
inappropriate
Installation and commissioning
Any load cell device that is damaged must not be installed or
put into operation.
Only perform installation, maintenance or repair tasks on the
load cell device when the machine has been stopped and is
secured from being turned on.
Only perform installation, maintenance or repair tasks on the
load cell device when there is no electrical power in the
system.
The load cell device must be securely mounted before being
placed in operation.
No modifications may be made to the load cell device.
Do not place electrical cables under mechanical strain.
Maintenance and repair
Warning – Danger of injury from crushing
Maintenance and repair tasks on the load cell device must be
performed only when the machine has been stopped and has
been secured from being turned on again.
Decommissioning
The load cell must be disposed of in accordance with all the
applicable national, state and local regulations.
MAGPOWR TLC-B
MI 850A356 1 A
Advertisement
Table of Contents
Need help?
Do you have a question about the MAGPOWR TLC-B Load Cell and is the answer not in the manual?