SENSOR MODELS AND DIMENSIONS Model number key ....................5-1 Available models ....................5-2 Split coupling sensors ..................5-3 In-roll coupling sensors .................. 5-5 Wire pulley coupling sensors ................5-7 PRODUCT SPECIFICATIONS SERVICE AND PARTS www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
INTRODUCTION About these All of the information herein is the exclusive proprietary property of Maxcess International, and is disclosed with the operating understanding that it will be retained in confidence and will instructions neither be duplicated nor copied in whole or in part nor be used for any purpose other than for which disclosed.
The TS style tension sensors allow three methods of coupling to the customer’s application. The coupling types are Split couplings, In-Roll coupling and Wire Pulley. The TS style tension sensors allow any combination of mounting and coupling types. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
The In-Roll configuration supports the customer’s roll assembly (hollow tube) on each side of the machine. The Wire Pulley coupling configuration supports the single strand or wire, and measures tension in the wire or strand as it passes over the pulley. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
The signal word CAUTION refers to the danger of slight to moderate bodily injuries or material damage. The signal word NOTICE refers to the possibility of damage to equipment. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
WARNING/CAUTION – Danger due to voltage, electric shock Reference to danger of injury caused by electric shock due to voltage. WARNING/CAUTION – Danger due to hot surfaces Reference to risk of injury caused by burning. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
Decommissioning The load cell must be disposed of in accordance with all the applicable national, state and local regulations. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
For the pillow block style, mount the pillow block adapter with two bolts. A series of holes is provided in the pillow block adapter to allow alignment of the sensor with the resultant force. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
52.0 +.05/-.00 mm diameter; 0.53 in. (13.5 mm) maximum depth for 5 lb, 50 lb, 2 kg, and 25 kg sensors 62.0 +.05/-.00 mm diameter; 0.76 in. (13.9 mm) maximum depth for 150, 330 and 500 lb, 75 kg, 150 and 250 kg sensors www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
A grease fitting is located on the top of the coupling for the split coupling models, and under the o-ring on in-roll coupling models. The grease fitting accepts a needle type grease gun. Lubricate the bearing with 1.0 gram Chevron SRI 2 or equivalent. www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
P – Pillow block Coupling type C – Split coupling R – In-roll W – Wire pulley Connector type EC12 Units type Blank – English units M – Metric units Specials – other variations www.maxcessintl.com MAGPOWR TS Load Cell MI 850A342 1 A...
Need help?
Do you have a question about the MAGPOWR TS Load Cell and is the answer not in the manual?
Questions and answers