Time Indicator; Error Code Information; General Setting; Clock Setting - King-Meter J-LCD User Manual

KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378

5.8 Time Indicator

The time is shown as bellow:
Time indicator

5.9 Error Code Information

If there is something wrong with the electronic control system, the error code will appear
automatically. Here is the detail information of the error code in Table 1 attached.
Error display
Make the display repaired when error code appears.

5.10 General Setting

Press [MODE] button to start the display, then hold both [UP] and [DOWN] for 2 seconds to
enter the setting menu.

5.10.1 Clock Setting

Select the hour value by [UP] / [DOWN], press the MODE key to confirm and enter the minute
setting; Select the minute value by [UP] / [DOWN], press the MODE key to confirm and enter
the next setting.
Set hours Set minutes
8