System Setting; 1Battery Power Delay Time Setting 8.8.1Battery Power Delay Time Setting; 2Max Speed Limit Setting - King-Meter Digital II User Manual

8.8 System Setting

8.8.1Battery Power Delay Time Setting Battery Power Delay Time Setting
DLY stands for battery power delay time. Use stands for battery power delay time. Use 【UP】 and 【DOWN】 to select battery power delay ti
Short press 【MODE】 to confirm and enter max speed limit setting interf

8.8.2Max Speed Limit Setting

MAX SPD stands for the max speed limit
25-40Km/h. Short press 【MODE】 to confirm and enter button walk assist enable/disable setting int
default is 40km/h.
This setting parameter is the upper limit specified by the display manufacturer. This setting parameter is the upper limit specified by the display manufacturer.
8.8.3 Button Walk Assist Enable/Disable Setting Button Walk Assist Enable/Disable Setting
PUS stands for button walk assist enable. Switch Y/N by 【UP】 and 【DOWN】. Y stands for enabl PUS stands for button walk assist enable. Switch Y/N by
long press 【DOWN】, walk assist function can be realized. , walk assist function can be realized. N stands for disable, that is no walk assist
【MODE】 to confirm and enter the walk assist speed setting. The default is Y. to confirm and enter the walk assist speed setting. The default is Y.
8.8.4 Walk assist speed setting
PU stands for button walk assist speed setting. By setting the value of walk assist speed, the walk assist speed can r button walk assist speed setting. By setting the value of walk assist speed, the walk assist speed can r button walk assist speed setting. By setting the value of walk assist speed, the walk assist speed can
be adjusted to meet the different riders be adjusted to meet the different riders' requirement. Through the adjustment of 【UP】
"20-35". Short press 【MODE】to confirm and en
output 25%).
to confirm and enter max speed limit setting interface. The default is
limit. Set the max speed limit by 【UP】 and 【DOWN
to confirm and enter button walk assist enable/disable setting interface. The to confirm and enter button walk assist enable/disable setting int
to confirm and enter the slow start setting interface. The default of display is 25(I.E.
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
o select battery power delay time 3/6/12s.
ter the slow start setting interface. The default of display is 25(I.E.
15
KING-METER TECHNOLOGY METER TECHNOLOGY CO., LTD
Fax：+0086 022 8478 0358 +0086 022 8478 0358 Tel: +0086 022 8478
ace. The default is 3s.
DOWN】, the setting range is
. Y stands for enable, that is, after
, that is no walk assist. Short press
】/【DOWN】, the range is