Sensor Setting, Speed Sensor Setting and Delay Time Setting. For the details, please see the
Attached List 3.
5.13.1 System Parameter Setting
Hold [UP] and [DOWN] both over 2 seconds to enter normal setting, while hold [UP] and
[DOWN] both again is to set up System Parameter, password 2962 must be entered.
[MODE] is to confirm and enter System Parameter Setting page, you can select the option
which you want.
Press [UP]/[DOWN] to select, and press [MODE] to enter the corresponding setting page.
5.13.2 Battery Power Bar Setting
Each bar represents a voltage value. 5 voltage values must be entered one by one.
Press [MODE] to confirm and [UP]/[DOWN] to select the value.
VOL = voltage
5.13.3 Pedal Assistant Level Setting
Pedal Assistant Level Select
SCA stands for booster parameter setting. 8 modes are provided in the selection of power
System Parameter Password Input
Option Select Page
Battery Power Bar Setting
12
KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax:+0086 022 8478 0358 Tel: +0086 022 8478 0378