System Reset Features (Addr 1197 & 1198) - NAPCO Gemini GEM-P1632 Programming Instructions Manual

WI897B 8/98
GEM-RP1CAe2 Keypad
GEM-RP2ASe2 Keypad
GEM-RP1CAe2 Keypad
GEM-RP2ASe2 Keypad
NAPCO Security Systems
Clear Dealer Program (Erases Dealer Program)
This erases the dealer program . Use this feature to start a
customized default program. Program Data and System
Status Memory is erased where Scheduled Data and Zone
Descriptions are maintained.
Access address 1197, then press the
NOTE: Enter Easy Menu Driven Program Mode to program system again.
Cold Start (Erases Entire Program)
This erases the entire program including Dealer Program by
erasing Program Data, Zone Description Data and System
Status Data (similar to a new panel).
Access address 1198, then press the
NOTE: Some features (schedules) can only be programmed again with the
Downloading Software.
button. Data entry is not allowed.
button. Data entry is not allowed.
GEM-P1632 Programming Instructions
Page 37