Table of Contents
Advertisement
Configuration Procedure
Step
Action
1
Verify that the device has been wired according to the safety-related function to be configured.
2
Remove power if the device is not powered off.
If an extension module HR6S-EP is connected, remove power from the extension module as
well.
3
Open the transparent cover of the device.
4
Set the application function selector to the required application function.
5
Set the start function selector to the required start function.
6
Commission the device according to the chapter Commissioning
HR9Z-B2200 8/2020
Configuration and Commissioning
(see page
82) .
81
Advertisement
Table of Contents
