Table of Contents
Advertisement
The information provided in this documentation contains general descriptions and/or technical
characteristics of the performance of the products contained herein. This documentation is not
intended as a substitute for and is not to be used for determining suitability or reliability of these
products for specific user applications. It is the duty of any such user or integrator to perform the
appropriate and complete risk analysis, evaluation and testing of the products with respect to the
relevant specific application or use thereof. Neither IDEC CORPORATION nor any of its affiliates
or subsidiaries shall be responsible or liable for misuse of the information contained herein. If you
have any suggestions for improvements or amendments or have found errors in this publication,
please notify us.
You agree not to reproduce, other than for your own personal, noncommercial use, all or part of
this document. You also agree not to establish any hypertext links to this document or its content.
IDEC CORPORATION does not grant any right or license for the personal and noncommercial use
of the document or its content, except for a non-exclusive license to consult it on an "as is" basis,
at your own risk. All other rights are reserved.
All pertinent state, regional, and local safety regulations must be observed when installing and
using this product. For reasons of safety and to help ensure compliance with documented system
data, only the manufacturer should perform repairs to components.
When devices are used for applications with technical safety requirements, the relevant
instructions must be followed.
Failure to use IDEC CORPORATION software or approved software with our hardware products
may result in injury, harm, or improper operating results.
Failure to observe this information can result in injury or equipment damage.
© 2020 IDEC CORPORATION. All rights reserved.
2
HR9Z-B2200 8/2020
Advertisement
Table of Contents
