Usb Operation; Bluetooth Operation; Aux-In Operation - Gogen BPS 736 CD User Manual

USB OPERATION

1. Press the FUNCTION button on unit to select USB mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback will start automatically
from Track 1.
3. To pause playback, press the
time will flash on the display. To resume playback, press the
4. To select a desired track, press the :/TUN+ or 9/TUN- button respectively during playing until
the desired track appears on the display. The unit will start play automatically.
5. To search for a particular passage during playback, press and hold the :/TUN+ or 9/TUN-
button to scan the current playing track at high speed until desired point (passage) appears,
then release the button for normal playback mode.
To select a song which track number exceeds 10, press the 10/M./FOLD.+ or 10/M./FOLD.-
6.
button each time to skip forward/backward 10 tracks, then press the :/TUN+ or 9/TUN- button
to select desired track.
7. To select a desired folder (if the USB contains more than one folder), press and hold the
10/M./FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward a folder, then press
the :/TUN+ or 9/TUN- button to select desired track.
To set "Programming Tracks" / "Repeat Play" / "Random Play" / "Intro Play", proceed as described in
the previous chapter "CD / MP3 OPERATION".
IMPORTANT: The USB port is intended for data transfer only, the external devices cannot be charged via
this USB port. The use of USB extension cords is not recommended. Don't unplug the USB from the unit
when playing or reading the USB device.

BLUETOOTH OPERATION

1. Press the FUNCTION button on unit to switch to BLUETOOTH function, the LCD will display
[BLUETOOTH] and the pair indicator will flash at high speed.
2. Turn on the Bluetooth function on the device, scan the unit GoGEN HAPPEE and connect, then
input the password 0000 if required, the pair indicator keep light up to indicate connection done,
and the display will show [BLUETOOTH]. Press Play to start playback.
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or
decrease the music volume to your desired level.
4. Press and hold the
NOTE: The Bluetooth works best within 10 meters in open air.

AUX-IN OPERATION

1. Press the FUNCTION button on unit to select the AUX mode.
2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN cable.
(audio cable is not included)
Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or
3.
decrease the music volume to your desired level.
4. Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1. Connect your microphone to the 6.3 mm MIC JACK found on the top panel of the unit.
Press the MIC VOL.+/- button on the unit to increase or decrease the microphone volume.
2.
3. Press the ECHO Button to turn on or off the echo effect of the microphone.
/PAIR/SCAN button on unit. The current track no. and playing
/PAIR/SCAN button to disconnect Bluetooth.
EN - 35
/PAIR/SCAN button again.