Getting Started; Basic Function - Gogen BPS 736 CD User Manual

GETTING STARTED

POWER SOURCE
This unit works with rechargeable lead-acid battery (the battery capacity 4000 mAh). Fully charge
the unit (around 4 hours) before using the product for the first time. The playback time is up to
22 hours (50% Volume) after full charging. Unplug the AC Power cord from the AC socket to work on
the battery pack after fully charged. Plugging the AC Power cord while the battery pack is attached
initiates the charging of this battery, the charge LED indicator lights red during charging, when the
battery is fully charged the indicator will turn to green. When the unit is with low battery, the LED
indicator will flash in red.
WARNING: Do not change the battery, only high-qualified personnel can perform this operation.

BASIC FUNCTION

TURNING THE UNIT ON/OFF
Press and hold the
NOTE: In CD/USB/Bluetooth/AUX mode, when the unit is not providing the main function for around 15
minutes, the unit will automatically switch into standby mode. Press the
Please note that low volume setting in the audio source may be recognized as "no audio signal", this will
affect the capability of signal detection from the device and can also originate an automatic switch into
standby mode. If this happens please reactivate the audio signal transmission or increase the volume setting
on the audio source player in order to resume playback.
Electrostatic Discharge hints – The unit may reset or may not reset to normal operation mode due
to electrostatic discharge, just switch it off and reconnect again.
SETTING THE FUNCTION MODE
To change the function modes, press the FUNCTION button repeatedly to choose
CD/USB/BLUETOOTH/AUX/RADIO function.
ADJUSTING THE VOLUME
Rotate the VOLUME knob on the unit to increase or decrease the music volume.
Press the MIC VOL.+/- button on the unit to increase or decrease the microphone volume.
BASS ADJUSTMENT
Press the BASS button on unit to increase the bass effect.
EQUALIZER (EQ) FUNCTION
This unit has a built-in equalizer system, Press the EQ button on unit to select a setting
that best matches the music style: FLAT, CLASSIC, ROCK, POP and JAZZ.
USB CHARGING
This unit provides a 5V 1A USB charging port for charging your smart phone. Connect the USB cable
of your smart phone to the USB CHARGE port for charging.
MICROPHONE ECHO ADJUSTMENT
Press the ECHO button on unit turn on or off the microphone echo effect.
FLASHING LIGHT
There are 5 flashing modes for the DISCO LED lights. Press the LIGHT button to choose the light
modes [L-1] ~ [L-5] . To turn off the light, press the LIGHT button until [L-OFF] showed on the display.
The projection light and strobe light will flash to the music beat in all light modes, the lights around the
buttons will be on in all light modes. Press and hold the LIGHT button to turn them on [E-ON] or off
[E-OFF].
button to turn the unit on, and press and hold the
EN - 32
button to turn the unit off.
button to turn on the unit again.