Philips AVENT SCD841 Manual page 17

1
AUDIO 20°C
VOX
1
VOX VOX VOX
VOX 20°C
1
VOX 20°C
Note: The link light shows that the parent unit is still on and connected
to the baby unit�
Note: When sensitivity level is not set to 'very high', low sounds will be
muted�
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit� Please see the Sensitivity level chapter for more
information�
All sounds are constantly transmitted to the parent unit� If your baby
cries, the display of the parent unit is still off, but the sound level
lights light up green and the sounds detected by the baby unit are
transmitted to the parent unit. As long as no sound is detected, the
sound level lights are off.
VOX mode
1 Press the mode button on the side of the parent unit to switch to VOX
mode�
Note: When the display is on, the selected mode is shown in the status
bar. The status bar is not visible when the display is off.
When the VOX mode is activated, the display and sound of the parent
unit switch off, if there is no sound detected for 20 seconds.
When sound is picked up by the baby unit, the display and sound of
the parent unit switch on immediately. The sounds are transmitted to
the parent unit and the sound level lights light up green� As long as no
sound is detected, the sound level lights are off.
Note: The minimum sound level to activate sound and display is
defined by the sensitivity setting.
- English 15 -