Problem Solving Guide; Messages In The Display - Miele ProLine CS 1212-1 Operating And Installation Instructions

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Messages in the display

Problem
The symbol  flashes in
the cooking zone dis-
play.
 appears in the cook-
ing zone display for a
few seconds after
switching it on.
 appears in the cook-
ing zone display for a
few seconds after
switching it on.
The cooking zone does
not get hot.
 appears in a cooking
zone display.
 flashes alternately
with  in the cooking
zone display. The cook-
ing zone has switched
off automatically.
Cause and remedy
No cookware is present on the cooking zone.
Unsuitable cookware is present on the cooking zone.
Suitable cookware has been removed from the cook-
ing zone.
 Use suitable cookware (see "Cookware").
The system lock is activated.
 Deactivate the system lock (see "Safety features –
System lock").
Demo mode has been activated.
 Briefly turn the (outer) right rotary control anti-
clockwise twice as far as it will go, then one more
time and hold it for approx. 3 seconds.
The overheating protection mechanism has been ac-
tivated.
 See "Safety features – Overheating protection".
There has been no cookware on the cooking zone
for more than 3 minutes, or the cookware is unsuit-
able.
 Use suitable cookware (see "Cookware") or
switch off the cooking zone if it is no longer
needed.
The overheating protection mechanism has been
activated.
 See "Safety features – Overheating protection".
TwinBooster level II was switched on on the linked
cooking zone.

Problem solving guide

37