Cleaning The Glass Ceramic Surface - Miele ProLine CS 1212-1 Operating And Installation Instructions

Cleaning and care
Cleaning the glass ceramic
surface

Risk of damage by pointed ob-
jects.
The seal between the hob and the
worktop could suffer damage.
The seal between the glass ceramic
and the frame could suffer damage.
Do not use pointed objects for clean-
ing.
Using washing-up liquid will not re-
move all soiling and residues. An in-
visible film can develop that can lead
to discolouration of the glass
ceramic surface. This discolouration
cannot be removed.
Clean the glass ceramic surface reg-
ularly with a proprietary glass
ceramic cleaning agent.
 Remove any coarse soiling with a
damp cloth and more stubborn soil-
ing with a scraper suitable for use on
glass.
 Then clean the glass ceramic surface
with the Miele ceramic and stainless
steel cleaner (see "Optional ac-
cessories") or with a proprietary glass
ceramic cleaner applied with kitchen
paper or a clean cloth. Do not apply
the cleaner while the hob is still hot,
as this can result in stains. Please fol-
low the cleaning agent manufac-
turer's instructions.
 Finally wipe the glass ceramic surface
with a damp cloth and polish with a
soft, dry cloth.
36
Residues can burn onto the hob the
next time it is used and cause damage
to the glass ceramic surface. Ensure
that all cleaning agent residues are re-
moved.
 Stains caused by limescale, water
and aluminium residues (spots with a
metallic appearance) can be removed
using Miele's ceramic and stainless
steel cleaner.

Risk of burning due to hot cook-
ing zones.
The cooking zones are hot during
use.
Wear oven gloves when removing
residues of sugar, plastic or alu-
minium foil from a hot ceramic sur-
face with a scraper suitable for use
on glass.
 Should any sugar, plastic or alu-
minium foil spill or fall onto the hot
ceramic surface while it is in use,
switch off the hob.
 Then carefully scrape off these
residues immediately whilst they are
still hot, using a scraper suitable for
use on glass.
 Afterwards, clean the ceramic surface
in its cooled state, as described
above.