Miele CS 1212 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Hob
  5. CS 1234
  6. Operating and installation instructions

Miele CS 1212 Operating And Installation Instructions

Ceramic hobs with induction
Hide thumbs Also See for CS 1212:
Table of Contents

Advertisement

Quick Links

See also: Operation & Installation Manual
Operating and installation instructions
Ceramic hobs with induction
CS 1212
CS 1221
CS 1234
en - GB
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 180 660

Advertisement

Table of Contents
loading

Related Manuals for Miele CS 1212

Summary of Contents for Miele CS 1212

  • Page 1 Operating and installation instructions Ceramic hobs with induction CS 1212 CS 1221 CS 1234 en - GB To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.

  • Page 2: Table Of Contents

    CS 1212 ........
  • Page 3 CS 1212 ........

  • Page 4: Guide To The Appliance

    Guide to the appliance CS 1212 a Cooking zone with twin booster (BI/II) Cooking zone controls: b Cooking zone with single booster (Bl) f Rear c Display g Front d Cooking zone symbols e Indicators Indicators l In-operation indicator m Booster indicator...
  • Page 5 Guide to the appliance CS 1221 a Cooking zone with twin booster (BI/II) Indicators b Display c Indicators d Control l In-operation indicator m Booster indicator n Residual heat indicator...
  • Page 6 Guide to the appliance CS 1234 abd Cooking zones with single Cooking zone controls: booster (BI) g Rear right c Cooking zone with twin booster (BI/II) h Front right e Cooking zone symbols i Rear left f Indicators j Front left k Display Indicators l In-operation indicator...

  • Page 7: Display

    = Booster II (only for cooking zones with twin boosters) = Overheating protection (see "Safety features") = Safety lock (see "Safety features") Cooking zones Cooking zone CS 1212 minimum to maximum C Rating in watts for 230 V** in cm* 10 - 16...
  • Page 8 Guide to the appliance CS 1221 minimum to maximum C Rating in watts for 230 V** in cm* 18 - 30 normal: 2400 with Booster I: 3000 with Booster II: 3700 Cooking zone CS 1234 minimum to maximum C Rating in watts for 230 V** in cm* Front left 14 - 19...

  • Page 9: Warning And Safety Instructions

    Warning and Safety instructions Correct application This appliance complies with all This appliance is intended for relevant local and national safety domestic use for the preparation of requirements. Improper use of the food only. appliance can, however, present a Any other usage is at the owner's risk risk of both personal injury and and could be dangerous.
  • Page 10 Warning and Safety instructions Safety with children Keep all pans out of reach of children. Turn pan handles inwards Activate the safety lock to ensure away from the edge of the hob. Danger that children cannot switch on the of burning or scalding. appliance inadvertently.
  • Page 11 H 05 VV-F should be inspected by a qualified (pvc insulated), available from the Miele electrician. The manufacturer cannot be Spare Parts. held liable for the consequences of an inadequate earthing system (e.g.
  • Page 12 Warning and Safety instructions Never open the appliance casing. Faulty components must only be Tampering with electrical connections replaced by genuine Miele original or components and mechanical parts is spare parts. The manufacturer can only highly dangerous to the user and can guarantee the safety of the appliance cause operational faults.
  • Page 13 Warning and Safety instructions Correct use Do not leave the appliance unattended whilst it is in use. For people fitted with a heart Pans that have boiled dry can cause pacemaker: damage to the ceramic surface for Please note that the area immediately which the manufacturer cannot be held surrounding the appliance is liable.
  • Page 14 Warning and Safety instructions Spray canisters, aerosols and other This hob is fitted with a cooling fan. inflammable substances should not be If a drawer is fitted directly underneath stored in a drawer under the hob. the hob, ensure that there is sufficient Cutlery inserts must be heat-resistant.
  • Page 15 Warning and Safety instructions Never heat an empty pan unless the If the hob is built in over a pyrolitic manufacturer of the pan expressly oven, the hob should not be used whilst states that you can do so. Because the pyrolitic process is being carried induction heating works extremely out, as this could trigger the...

  • Page 16: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment.

  • Page 17: Before Using For The First Time

    Before using for the first time Before using for the first time Please stick the extra data plate for the appliance supplied with this When the induction hob is first documentation in the space provided in connected, and after a power cut, all of the "After sales service"...

  • Page 18: Induction

    Induction The induction principle If no pan or an unsuitable pan is placed on the cooking zone, the cooking zone An induction coil is located under each will switch off automatically after 3 cooking zone. When a cooking zone is minutes.

  • Page 19: Noises

    Induction Noises The appliance has a cooling fan to help extend the life of the electronics. When When using an induction cooking zone, the hob is being used intensively, this the following noises can occur in the will come on and you will hear a pan, depending on what it is made of whirring sound.

  • Page 20: Pans

    Induction Pans Pan size Suitable pans include: To make optimum use of the cooking zones, choose pans with diameters – stainless steel pans with a magnetic larger than the innermost markings but base smaller than the outermost markings. If – enamelled steel pans the diameter of the pan is smaller than the innermost marking, the induction –...

  • Page 21: Operation

    Operation Switching on and off Residual heat indicator The residual heat indicator remains on until the induction hob is cool enough to touch. Do not touch or place any heat sensitive objects on the induction hob while the residual heat display is still on.

  • Page 22: Settings

    Operation Settings Cooking process Settings* Melting butter, chocolate etc. 1 - 2 Dissolving gelatine Preparing yoghurt Thickening sauces containing egg yolk and butter 1 - 3 Warming small quantities of food/liquid Keeping warm food which sticks easily Cooking rice Warming liquid and semi-solid foods 2 - 4 Thickening sauces, e.g.

  • Page 23: Auto Heat-Up

    Operation Auto heat-up Activating Auto heat-up ^ Turn the control anticlockwise as far Continued Heat-up time as it will go, and hold in that position cooking setting in minutes and until A appears in the display. seconds (approx.) 0 : 15 If you hold the control for too long, L will appear in the display which 0 : 15...

  • Page 24: Booster Function

    Operation Booster function To activate Booster l ^ Turn the control past power setting 9 The cooking zones are equipped with single (l) or twin boosters (I/II) (see to BI or BI/II, and then back to 9. "Guide to the appliance"). I will appear in the display for the When activated, the power is boosted cooking zone and the B booster...

  • Page 25: Keeping Warm

    Operation Keeping warm Useful tips Each cooking zone has a keeping Only use pans for keeping food warm. warm function. Cover the pan with a lid. If the keeping warm function has been You do not have to stir food while it is activated, the cooking zone will switch being kept warm.

  • Page 26: Safety Features

    Safety features Safety lock Safety switch-off Keep children away from the hob for Your hob is fitted with a safety their own safety. switch-off feature in case you forget to switch it off yourself. Your appliance is equipped with a If one of the cooking zones is heated safety lock to prevent the hob and for an unusually long period of time...

  • Page 27: Overheating Protection

    Safety features Overheating protection – If the temperature rises after the power supply has been reduced, the All the induction coils and the cooling cooking zones will switch off. element for the electronics are fitted Other cooking zones may switch off with an overheating protection shortly afterwards.

  • Page 28: Cleaning And Care

    Cleaning and care Miele offer a range of branded cleaning To avoid damaging the surface or and conditioning agents for your hob. your hob, do not use: See "Optional accessories". – cleaning agents containing soda, alkalines, ammonia, acids or Under no circumstances use a...
  • Page 29 Cleaning and care Ceramic surfaces Stainless steel Wipe all coarse soiling off using a The ceramic and stainless steel hob damp cloth. Stubborn soiling may need cleaner is suitable for cleaning stainless to be removed with a shielded scraper steel surfaces (see "Optional blade.

  • Page 30: Problem Solving Guide

    (BS 7671 If it still will not switch on, contact a in the UK). Repairs and other work qualified electrician or the Miele Service by unqualified persons could be Department. dangerous. The manufacturer cannot be held liable for ...
  • Page 31 Problem solving guide ... one of the following has occurred: ... The cooling fan continues to run after the appliance has been – The booster has deactivated early switched off. automatically. This is not a fault. The fan will continue –...

  • Page 32: Optional Accessories

    Miele branded cleaning and conditioning products are available for your appliance. These can be ordered via the internet at www.miele-shop.com, or from Miele (see back cover for contact details) or from your Miele dealer. Ceramic and stainless steel hob cleaner 250 ml...

  • Page 33: Safety Instructions For Installation

    Safety instructions for installation This appliance must not be installed Fit the wall units and extractor hood over a dishwasher, washing machine, before fitting the appliance to avoid tumble dryer, refrigerator or freezer. damaging the surface. The high temperatures radiated by hobs could damage the appliance The veneer or laminate coatings of below.
  • Page 34 Safety instructions for installation Safety distance above the appliance When two or more appliances are installed together below a cooker hood, e.g. an induction hob or wok and a gas hob combiset, which have different safety distances given in the installation instructions, you should select the greater distance of the two.
  • Page 35 The minimum distance a between the worktop cut-out and a wall or tall unit to the right or left of it is: 40 mm CS 1212 CS 1221 CS 1234 CS 1223 50 mm CS 1112...
  • Page 36 Safety instructions for installation Safety distance when installing the appliance near a wall with additional niche cladding There must be a minimum distance of 50 mm between the niche cladding and the worktop cut-out. This distance is only necessary for niche cladding made of wood or any other combustible material.

  • Page 37: Appliance And Building-In Dimensions

    Appliance and building-in dimensions CS 1212 2 8 8 5 2 0 2 7 2 ß 5 0 0 2 3 0 1 7 5 a Spring clamps b Front c Building-in depth d Mains connection box with mains connection cable, L = 2,000 mm...
  • Page 38 Appliance and building-in dimensions CS 1221 5 2 0 3 8 0 3 6 4 ß R 4 5 0 0 2 2 4 1 7 5 a Spring clamps b Front c Building-in depth d Mains connection box with mains connection cable, L = 2,000 mm...
  • Page 39 Appliance and building-in dimensions CS 1234 5 2 0 5 7 6 ß R 4 5 0 0 2 1 7 1 5 4 a Spring clamps b Front c Building-in depth d Mains connection box with mains connection cable, L = 2,000 mm...

  • Page 40: Preparing The Worktop

    Preparing the worktop ^ Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the appliance.

  • Page 41: Installation Of Several Appliances

    Installation of several appliances When installing two or more appliances next to each other a spacer bar b must be used between each one. See "Fitting the spacer bars and support brackets". Worktop cut-out Worktop cut-out - two appliances - three appliances To calculate the cut-out width (D) required: Add up the widths of each appliance (e.g.
  • Page 42 Installation of several appliances Positioning the spacer bars and spring clamps 2 5 - 3 0 5 0 5 0 2 5 - 3 0 5 6 8 3 7 2 / 2 8 0 / 5 7 6 3 8 0 / 2 8 8 / 5 6 8 3 7 2 /...

  • Page 43: Fitting The Spring Clamps And Spacer Bars

    Fitting the spring clamps and spacer bars Wooden worktops Granite and marble worktops The screws are not required for 2 5 - 3 0 granite or marble worktops. 2 5 - 3 0 ^ Position the spring clamps supplied a and spacer bars b on the top edge of the cut-out in the positions ^ Position and secure the spring marked.
  • Page 44 Fitting the spring clamps and spacer bars ^ Coat the side edges and the lower edges of the spring clamps with silicone. ^ Then fill gap d between the spacer bars and the worktop with silicone from the tube supplied.

  • Page 45: Installing The Appliance

    Installing the appliance ^ Feed the connection cable down through the cut-out. ^ Then drop the front edge of the appliance into the cut-out. ^ Using both hands, press down evenly on the sides of the appliance until it clicks into position. When doing this make sure that the seal under the appliance sits flush with the worktop on all sides.

  • Page 46: General Installation Tips

    General installation tips Tiled worktop Grout lines and the hatched area underneath the hob frame must be Do not use any sealant unless smooth and even. If they are not, the expressly instructed to do so. The hob will not sit flush with the worktop sealing strip under the edge of the top and the sealing strip underneath the part of the appliance provides a...

  • Page 47: Electrical Connection

    H 05 V V-F be provided for all poles. (pvc insulated), available from Miele. For extra safety it is advisable to install a suitable residual current device Installation, repairs and other work (RCD).
  • Page 48 Electrical connection Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most important that this basic safety requirement is present and tested regularly and if there is any doubt the electrical wiring in the home should be inspected by a...
  • Page 49 Electrical connection Wiring diagram CS 1234 200-240 V~ 200 - 240 V~ 200 - 240 V~ (L3) 200 - 240 V~ 200 - 240 V~ (L2) 200 - 240 V~ N.B. This appliance is supplied single phase only in the U.K.

  • Page 50: After Sales Service, Data Plate

    Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance which are given on the data plate. N.B. A call-out charge will be applied for unnecessary service visits where the problem could have been rectified as described in these instructions.
  • Page 52 Alteration rights reserved/ 3608 M.-Nr. 07 180 660 / 03...

Table of Contents