Problem Solving Guide; Messages In The Display - Miele KM 6565 FR Operating And Installation Instructions

Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the the Miele Dealer.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.

Messages in the display

Issue
After the hob has been
switched on  appears
in the timer display for a
few seconds.
After the hob has been
switched on,  appears
briefly in the timer
display. The cooking
zones do not heat up.

flashes in the
timer display and
the hob switches
off automatically.
Cause and remedy
The system lock or safety lock is activated.
 Deactivate the system lock or safety lock (see
"System lock / Safety lock").
The hob is in demonstration mode.
 Touch the 0 sensor control on any of the numerical
displays.
 Touch the 0 and 2 sensor controls at the same
time until  flashes alternately with  in the timer
display.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.
 Clean off any soiling and/or remove the object (see
"Safety features – Safety switch-off").

Problem solving guide

49