Problem Solving Guide; Messages In The Display - Miele KM 6520 FR Operating And Installation Instructions

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Messages in the display

Problem
After the hob has been
switched on  appears
in the timer display for a
few seconds.
After the hob has been
switched on  appears
in the timer display
briefly. The cooking
zones do not heat up.
 flashes in the timer
display and the hob
switches off automatic-
ally.
48
Cause and remedy
The system lock or safety lock is activated.
 Deactivate the system lock or safety lock (see
"System lock / Safety lock").
The hob is in demonstration mode.
 Touch the 0 and 2 sensor controls at the same
time until  flashes alternately with  in the timer
display.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.
 Clean off any dirt and/or remove the object (see
"Safety switch-off").