TechniSat DIGITRADIO 231 OD Manual page 141

13.4 Language
> Open the main menu by pressing and holding the INFO/MENU button.
> Use the TUNING/SKIP buttons to select the menu item [System settings] >
[Language] and press the SELECT button.
> Use TUNING/SKIP to select one of the available languages and confirm the
selection by pressing SELECT.
> Press the INFO/MENU button repeatedly to exit the setting.
13.5 Factory settings
If you change the location of the device, it is possible that the saved stations can no
longer be received. In this case you can reset the device to factory settings to delete all
the saved stations and then initiate a new scan.
> Open the main menu by pressing and holding the INFO/MENU button.
> Use the TUNING/SKIP buttons to select the menu item [System settings] >
[Factory settings] and press the SELECT button.
DE
EN
FR
NL
PL
IT
141