After the scan is complete, the first station is played back in alphanumeric order.
>
Press the SCAN button to carry out a full scan.
Alternatively:
>
Open the main menu by pressing and holding the INFO/MENU button.
>
Use the TUNING/SKIP buttons to select the menu item [Scan settings] and press
the SELECT button.
>
Then use the TUNING/SKIP buttons to select the menu item [Full scan] and
press the SELECT button.
>
[Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found are displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 6.3.2).
114