TechniSat DIGITRADIO 231 OD Manual page 122

9.3 Automatic station scan
> Press the SCAN button to start the scan. Please note the scan settings in Section
9.5 when doing so.
> If a FM station with sufficient signal strength is found, the scan stops and the
station is played.
If an RDS station is received, the station name, and possibly the radio text,
appear.
Please use the manual station scan for setting weaker stations.
9.4 Manual station scan
> By briefly pressing the TUNING/SKIP buttons several times, the frequency can be
set in 0.05 MHz steps.
9.5 Scan settings
With this menu item you can set the sensitivity of the automatic scan.
> Open the main menu by pressing and holding the INFO/MENU button.
122