TechniSat DIGITRADIO 231 OD Manual page 135

13 System settings
All settings explained in this section apply equally to all operating modes.
13.1 Date and time settings
13.1.1 Manually setting the date/time
Depending on the setting for time updates (Section 13.1.2), the date and time may have
to be set manually.
> Open the main menu by pressing and holding the INFO/MENU button.
> Use the TUNING/SKIP buttons to select the menu item [System settings] >
[Date/Time] > [Date/Time setting] entry and press the SELECT button.
> The first digits (day) of the date flash and can be changed using TUNING/SKIP.
Press the SELECT button to apply the setting.
> The next date digits (month) then start to flash and can again be changed as
described above.
> Press SELECT after each additional setting in order to go to the next setting.
> To set the time, proceed in the same way as described above.
DE
EN
FR
NL
PL
IT
135