TechniSat DIGITRADIO 231 OD Manual page 139

13.1.5 Setting the clock design
You can set the clock design that is shown in the display in standby mode (mains
operation) in this sub-menu.
> Open the main menu by pressing and holding the INFO/MENU button.
> Use the TUNING/SKIP buttons to select the menu item [System settings] >
[Date/Time] > [Clock Design] and press the SELECT button.
> Use TUNING/SKIP to select the following options:
[Normal Digital] (default setting, date and time)
[Digital large] (Time in large letters only)
[Analogue classic] (Classic dial of an analogue clock)
[Modern Analogue] (Modern dial of an analogue clock)
> Press the SELECT button to apply.
> Press the INFO/MENU button several times to exit the setting.
DE
EN
FR
NL
PL
IT
139