Table of Contents
Advertisement
A095
- Visual inspection of all fluid lines and electrical cables
Orientation
Requirement
Procedure
20
Depending on the duration of use, usage profile of the machine and different
environmental conditions, it is absolutely necessary to subject all fluid lines and
electrical cables to regular visual inspections. This allows that any faults or problems
can be detected and eliminated early on.
Damaged fluid lines may cause leakage of fluids under high
pressure. Be sure to use personal protective equipment during visual
inspection.
Should defective points be found on fluid lines or electrical cables during the visual
inspection, the machine must be switched off and the damaged lines or cables must
be promptly replaced.
Replaced fluid lines must be tightened to the torque specified by the
manufacturer.
1. Visual inspection of all supply and fluid lines.
2. Visual inspection of all electrical cables.
Maintenance Summary - Care activities
Maintenance Instructions
DIE219EN - 05.06.2019
B500
Advertisement
Table of Contents
