Viewing Totals; Resettable Totals - Graco LDP5 Instructions Manual

Operation
3. Lock the trigger. See Locking and Unlocking the
Trigger, page 10.
Fluid flows, and the displayed dispensed amount
counts up from zero. When the preset amount is dis-
pensed, the trigger unlocks, fluid flow stops, the dis-
pensed amount is displayed, and the meter switches to
the Manual Dispense Mode.
To stop fluid flow before the preset amount is dis-
pensed, manually unlock the trigger. To continue the
dispense, lock the trigger, and the dispensed amount
resumes counting toward the preset amount.
To continue dispensing after the trigger unlocks at the
preset dispense amount, squeeze the trigger, and the
dispensed amount resumes counting until the trigger is
released.
NOTE: When the trigger unlocks, the automatic nozzle
prevents the fluid in the extension from running out.
18

Viewing Totals

To view the non–resettable and resettable totals follow
these instruction. To change the resettable total, see
Resettable Total, page 12.
1. If the display is blank
(Asleep), press and hold the
Manual/Reset or Auto/Reset
button to wake it up.
2. Press and hold the Total but-
ton to view the resettable
total amount (F . 19).
IG

Resettable Totals

AUTO
F . 19
IG
3. Press and hold the Total but-
ton again to view the
non-resettable, grand total
amount.
If the unit of measurement is
gallons, quarts, or pints, the
resettable total is displayed in
gallons, (F . 19). If the unit of measurement is
IG
liters, the resettable total is displayed in liters.
Pressing and holding the Total button toggles
between the non–resettable and resettable total.
PTS QTS
GAL
LITERS
R-TOTAL
ti12059a
312668ZAC