Viewing Totals - Graco EM5 Instructions-Parts List Manual

Viewing Totals

This is the procedure for viewing the non-resettable
and resettable totals in gallons or liters for viewing the
calibration factor.
1. Press the Total button.
The non-resettable total amount is shown on the
display in the current units, as shown in Fig. 10.
Fig. 10
Operation
GAL
TOTAL
TI0272
2. Press the Total button again.
The resettable total amount is shown on the
display in the current units, as shown below.
Fig. 11
3. Press the Reset button.
The unit returns to Standard dispense mode, and
the Standard mode display is shown.
GAL
R-TOTAL
TI0272
309142 13