Units Of Measurement - Graco LDP5 Instructions Manual

3. Do one of the following:
a. Press and hold the Man-
ual / Reset button to reset
the total to zero (0).
b. Press and hold the Auto /
Reset button to store the
zero (0) measurement
unit. The Units of Mea-
surement Menu displays.
or
• Press and hold the Auto /
Reset button to store the
currently displayed total.
The Units of Measure-
ment Menu displays.

Units of Measurement

Sets the units of measurement to gallons, quarts, pints,
or liters.
AUTO
F . 13
IG
312668ZAC
1. If the Units of Measurement Menu is not already
2. GAL, QTS, PTS or LITERS blinks indicating the
3. Do one of the following:
or
PTS QTS
GAL
LITERS
R-TOTAL
ti12055a
displayed, complete steps 1- 3 in Setup Menus,
page 12.
Units of Measurement Menu screen is displayed.
a. Press and hold Manual /
Reset button to display
next unit of measure-
ment in sequence. Each
time the button is
pressed and held, the
next unit of measure-
ment displays.
b. When desired measure-
ment unit is displayed,
press and hold Auto /
Reset button to lock in
new measurement unit.
Calibration Menu dis-
plays.
• Press and hold the Auto /
Reset button.
The currently displayed
measurement unit is
stored. Calibration Menu
displays.
Operation
13