Shut Off Default Amount - Graco LDP5 Instructions Manual

2. AUTO blinks indicating the Auto Preset Amount
Menu. The currently stored auto preset amount is
displayed. (This is the amount displayed when the
Auto / Reset button is pressed during normal oper-
ation.)
3. Do one of the following:
a. To enter a new auto pre-
set amount, press and
hold the 10 button to
change the 10's digit,
the 1.0 button to change
the 1's digit,
and the 0.1 button to
change the first decimal
digit. Zero cannot be
entered.
NOTE: to reset the display to
0.00, press and hold the Manual /
Reset button.
b. Press and hold the Auto /
Reset button to lock in
the amount. The Shut Off
Default Amount Menu
displays.
OR
• Press and hold the Auto /
Reset button to lock in
the currently displayed
auto preset amount. The
display advances to the
Shut–Off Default Amount
Menu.
312668ZAC

Shut Off Default Amount

Prevents accidental overfills when dispensing with the
trigger locked in Manual mode. The shut off default
amount is factory preset at 5 quarts.
AUTO
F . 16
IG
1. If the Shut Off Default Amount Menu is not already
displayed, complete steps 1 - 3 of the Setup
Menus, page 12.
2. The clock icon blinks indicating the Shut Off Default
Amount Menu is displayed. The stored shut off
default amount is displayed.
Operation
PTS QTS
GAL
LITERS
R-TOTAL
ti12058a
15