Control Mode - GE PACE5000 User Manual

3 Operation
3.4

Control Mode

In measure mode, press
instrument stops controlling pressure and changes to measure mode:
Key to display
1 Current measured pressure value (in limits green, out of limits blue).
2 In active control mode.
Pressure reading filter ON.
Head (pressure) value applied.
Control mode with overshoot.
Tare enabled.
3 Press to switch between controlled pressure and measured pressure.
4 Nudge up.
5 Set-point, press and the display changes to numeric keys.
6 Nudge down.
7 Status area shows effort meter set in global set-up, press to enter control set-up.
Notes:
Active mode - control active, except in measure mode.
Passive mode - when the controller achieves inlimits condition, measure mode is automatically selected.
Gauge mode - when the controller achieves zero gauge inlimits condition, measure mode is automatically
selected and the zero valve opens.
K0443 Issue No. 3
and the instrument changes to control mode. Press
Control
3 - 6
and the