Type Cpu Units - Omron SYSMAC CP Series User Manual

3 Part Names and Functions
N

-type CPU Units

Slot 1
CP1W-CIF01
RS-232C
Option Board
Note CP2W-CIFD
Serial Communication Option Board
Model numbers
CP1W-CIF01
CP1W-CIF11
CP1W-CIF12-V1
CP2W-CIFD1
CP2W-CIFD2
CP2W-CIFD3
How to Mount a Serial Option Board
When mounting an Option Board, first remove the slot cover.
Press the up/down lock-levers on both sides of the Option Board slot cover at the same time to
unlock the cover, and then pull the cover out.
Check the alignment to make the corner cut of the Option Board fit in the Option Board slot, and
firmly press the Option Board in until it snaps into place.
Precautions for Correct Use Precautions for Correct Use
Always turn OFF the power supply to the PLC before mounting or removing an Option Board.
3-18
CP2E N
CPU Unit
Slot 2
CP1W-CIF11/12-V1 CP2W-CIFD1
RS-422A/485 RS-232C&RS-232C
Option Board Option Board
can only be mounted on option slot 1.
Port
One RS-232C port
One RS-422A/485 port (not isolated) 50m
One RS-422A/485 port (isolated)
Two RS-232C Ports
One RS-232C port and one RS-485
port (isolated)
Two RS-485 ports (isolated)
-type
CP1W-CIF01 CP1W-CIF11/12-V1
RS-232C RS-422A/485
Option Board Option Board
CP2W-CIFD2
RS-232C&RS-485
Option Board
Maximum
transmission
distance
15m
500m
15m
15m (RS-232C)
500m (RS-485)
500m
CP2E CPU Unit Hardware User's Manual(W613)
CP2W-CIFD3
RS-485&RS-485
Option Board
Connection method
Connector (D-sub, 9 pin female)
Terminal block (using ferrules)
Terminal block (using ferrules)
Terminal block (using ferrules)
Terminal block (using ferrules)
Terminal block (using ferrules)