Omron SYSMAC CP Series User Manual page 10

Terminology and Notation
Term
E-type CPU Unit
S-type CPU Unit
N-type CPU Unit
CX-One
CX-Programmer
6
An essential model of CPU Unit that supports connections to Programmable Terminals
and basic control applications using instructions such as basic, movement, arithmetic,
and comparison instructions.
Essential models of CPU Units are called "E
in this manual.
The models of E -type CPU Units are shown below.
CP2E-E D -
A standard model of CPU Unit that supports connections to inverters and servo drives.
Standard models of CPU Units are called "S
Units" in this manual.
The models of S -type CPU Units are shown below.
CP2E-S D -
A network model of CPU Unit that supports Ethernet connection and enhanced position-
ing functions such as 4-axis linear interpolation and pulse.
Network models of CPU Units are called "N
Units" in this manual.
The models of N -type CPU Units are shown below.
CP2E-N D -
A programming device that applies for programming and debugging PLCs.
CP2E CPU Units are supported by CX-One version 4.51 or higher and CX-Programmer
version 9.72 or higher.
Description
-type CPU Units" or "E14/20 CPU Units"
-type CPU Units" or "S30/40/60 CPU
-type CPU Units" or "N30/40/60 CPU
CP2E CPU Unit Hardware User's Manual(W613)