Introduction - Omron SYSMAC CP Series User Manual

Introduction

Thank you for purchasing a SYSMAC CP-series CP2E Programmable Controller.
This manual contains information required to use the CP2E. Read this manual completely and be sure
you understand the contents before attempting to use the CP2E.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems
• Personnel in charge of designing FA systems
• Personnel in charge of managing FA systems and facilities
Applicable Products
CP-series CP2E CPU Units
• Essential Model CP2E-E
A model of CPU Unit that supports connections to Programmable Terminals and basic control
applications using instructions such as basic, movement, arithmetic, and comparison instructions.
• Standard Model CP2E-S
A model of CPU Unit that supports connections to inverters and servo drives.
• Network Model CP2E-N
A model of CPU Unit that supports Ethernet connection and enhanced positioning functions such
as 4-axis linear interpolation and pulse.
The CP Series is centered around the CP1H, CP1L, CP1E and CP2E CPU Units and is designed
with the same basic architecture as the CS and CJ Series.
Always use CP-series Expansion Units and CP-series Expansion I/O Units when expanding I/O
capacity.
CP2E CPU Unit Hardware User's Manual(W613)
D -
D -
D -
1