Pre-Installation And Application Warnings - Directed DB3 Installation Manual

Pre-installation and application warnings

This section highlights important information for this specific firmware and will assist in pricing accordingly, as
START HERE
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
T-Harness is not compatible.
compatible
Vehicle Takeover
Firmware notes
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
Š
Refer to the "Vehicle connections" following the installation diagram.
Š
Footnotes
[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory
hood pin, or if not supported in data.
[2] Tach:
The tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
[3] K-Line connection: Not required in US vehicles without transponder.
[4] Ignition and Accessory Interrupt: Only required to retain OEM remote functionality during remote start runtime.
5
403.HK14 1.05 2020 Hyundai Kona
©2022 VOXX•DEI LLC. All rights reserved.
Refer to the Quick Reference Guide section for more details.
Keys required for 1 Keys required
programming for operation
0