Creating Your First Trace On The Oma - Keysight N4391B Getting Started Manual

Creating Your First Trace on the OMA

Keysight N4391B Optical Modulation Analyzer Getting Started Guide
The following procedure will familiarize you with the OMA by loading a
recorded demo then using the Smart Setup dialog to ensure that the
parameters are set properly.
The recorded demo is a PRBS 15 dual polarization signal with a
performance that is typically achieved on optical coherent long-haul
transmitters. This signal has incorporated bit errors inserted into the
transmitter PRBS generation.
1 Power on the equipment.
2 Start the Keysight 89600 VSA Software interface by double-clicking on
the Keysight OMA icon (
3 In the Keysight 89600 VSA Software interface, select
File > Recall > Recall Demo.
4 In the Recall Demo dialog, open the \Optical Signals\Generic\
DP-QPSK_10.12 GHz_with_errors.htm file.
5 Select the Smart Setup menu.
).
Getting Started 2
29