Information Switch (If Equipped) - Suzuki SWIFT 2022 Series Owner's Manual

To reduce the brightness of the instrument
panel lights, turn the indicator selector
knob (1) counterclockwise.
WARNING
Do not adjust the brightness of the
instrument panel lights while driving.
Otherwise, you could lose control of
the vehicle.
NOTE:
• If you do not turn the knob within several
seconds of activating, the brightness
control display will be canceled automat-
ically.
• When you reconnect the lead-acid bat-
tery, the brightness of the instrument
panel lights will be reinitialized. Readjust
the brightness according to your prefer-
ence.
NOTE:
If you adjust to the maximum brightness
level when the position lights or headlights
are on, the following functions will be can-
celled.
• The function which automatically dims
the brightness of instrument panel lights
• The function which operates with the
brightness control, except maximum
brightness level
Information switch
(if equipped)
You can use the information switch to
switch the display indication when the igni-
tion switch is in "ON" position or the igni-
tion mode is ON and the vehicle is
stationary.
EXAMPLE
(1)
(1) Information switch
(2) Indicator selector knob
To switch to the setting mode
1) Push and hold the information switch
(1) when the vehicle is stationary.
2) After the display of setting mode is
shown, select the setting item that you
want to change by turning the indicator
selector knob (2) left or right. Refer to
"Setting mode" in this section for
details.
NOTE:
If you switch to the setting mode while
either of the following items is shown on the
information display, the current value will be
reset. If you do not want to reset its value,
push the indicator selector knob (2) quickly
beforehand and switch to the other item.
• Average speed
• Average fuel consumption
• Driving time
• Total idling stop time and total idling stop
fuel saved (if equipped)
(2)
To exit the setting mode
52RS108
1) Push the indicator selector knob (2)
and select "Back".
2) Push the information switch (1) quickly.
NOTE:
You can exit the setting mode by either of
the following operations:
• Turn the ignition switch to "ACC" or
"LOCK" position.
• Press the engine switch to change the
ignition mode to ACC or LOCK (OFF).
• Start driving your vehicle.
BEFORE DRIVING
2-98