Suzuki SWIFT 2022 Series Owner's Manual page 104

Information shown after driving
When you turn the ignition switch to
"LOCK" position or press the engine switch
to change the ignition mode to LOCK
(OFF), the following information appears
for several seconds on the display (D) of
the information display.
EXAMPLE
Setting mode
When the ignition switch is in "ON" position
or the ignition mode is ON and the vehicle
is stationary, you can enter the setting
mode of the information display by pushing
and holding the indicator selector knob (3)
for more than 3 seconds.
• To select the setting that you want to
change, turn the indicator selector knob
(3) left or right.
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select "Back"
and push the indicator selector knob (3).
EXAMPLE
80SM307R
NOTE:
The currently selected setting item is sur-
rounded by a frame.
NOTE:
• If you push and hold the indicator selec-
tor knob (3) to enter into the setting
mode when the display (C) shows aver-
age fuel consumption, average speed,
driving time, total idling stop time and
total idling fuel saved (if equipped), the
value will be reset simultaneously. If you
do not want to reset the value, push the
indicator selector knob quickly to switch
the indication of the display.
• If you turn the ignition switch, press the
engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be canceled
automatically.
52RM20910
BEFORE DRIVING
2-84