Suzuki SWIFT 2022 Series Owner's Manual page 193

OPERATING YOUR VEHICLE
NOTE:
• If you still cannot select the ignition
modes, there may be some problems
with the keyless push start system. Con-
tact an authorized SUZUKI dealer for an
inspection of the system.
• The immobilizer/keyless push start sys-
tem warning light come on for about 5
seconds while the "PUSH" indicator light
is blinking. Refer to "Warning and Indica-
tor Lights" in the "BEFORE DRIVING"
section for details.
• You may customize the system to cause
the interior buzzer to sound once for the
"remote controller out of sensing range"
warning. To incorporate this customiza-
tion, please contact an authorized
SUZUKI dealer.
• If the battery of the remote controller is
about to become completely discharged,
the keyless push start system remote
controller battery consumption warning
light in the instrument cluster will come
on for a few seconds when you press the
engine switch to change the ignition
mode to ON. Refer to "Keyless push
start system remote controller battery
consumption warning light (Instrument
cluster Type A)" in "Keyless push start
system remote controller / Keyless entry
system transmitter (if equipped)" in the
"BEFORE DRIVING" section for details.
3-9
If the master warning indicator light
blinks and the ignition modes cannot
be selected (Instrument cluster Type B
or C)
Your keyless push start system remote con-
troller may not be sensed as being within the
interior workable area (refer to the related
explanation in this section). Try again after
checking that you have the remote controller
with you. If the ignition modes still cannot be
selected, the battery of the remote controller
may be discharged. To select an ignition
mode, you must then use the following
method:
EXAMPLE
(2)
1) Without depressing the brake pedal
and the clutch pedal, push the engine
switch (1).
2) The master warning indicator light in
the instrument cluster blinks and the
message
START SWITCH" appears in the infor-
mation display within about 10 sec-
onds. Touch the engine switch with
LOCK button side of remote controller
(2) for about 2 seconds.
NOTE:
• If you still cannot select the ignition
modes, there may be some problem with
the keyless push start system. Contact
an authorized SUZUKI dealer for an
inspection of the system.
• The immobilizer/keyless push start sys-
tem warning light will come on for about
5 seconds while the master warning indi-
(1)
cator light is blinking. In addition, the
information display in the instrument
cluster will show a message during this
time. Refer to "Information display" in
"BEFORE DRIVING" section for details.
• You may customize the system to cause
the interior buzzer to sound once for
warning that remote controller is out of
sensing range. To incorporate this cus-
tomization, please contact an authorized
SUZUKI dealer.
52RM30020
"PLACE KEY FOB ON