Suzuki SWIFT 2022 Series Owner's Manual page 154

NOTICE
Continuing to drive the vehicle when
the malfunction indicator light is on
or blinking can cause permanent
damage to the vehicle's emission
control system, and can affect fuel
economy and driveability.
(For K12D engine models)
Also, if this light comes on when the
engine is running, there is a problem with
the continuously variable transmission sys-
tem or engine cooling system. Ask your
SUZUKI dealer to have the system
inspected.
(Except for K12D engine models)
Also, if this light comes on when the
engine is running, there is a problem with
the continuously variable transmission sys-
tem. Ask your SUZUKI dealer to have the
system inspected.
Transmission warning light
(if equipped)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on for several seconds so you can
check that the light is working.
If this light comes on when the engine is
running, there is a problem with the auto-
matic transmission system. Ask an autho-
rized SUZUKI dealer to have the system
inspected.
(For CVT models)
If the CVT fluid temperature becomes too
high, this light will blink. Stop the vehicle in
a safe place and let the fluid cool down.
Immobilizer/keyless push start sys-
tem warning light
80J219
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
If this light blinks or stays on, there is a
problem with the system or the steering
lock cannot be released. If this happens,
press the engine switch, turning the steer-
ing wheel to the right or left.
If this light still blinks or stays on even if
you start the engine with normal voltage of
the vehicle battery, ask an authorized
SUZUKI dealer to have the system
inspected.
BEFORE DRIVING
80JM122
2-134