Suzuki SWIFT 2022 Series Owner's Manual page 93

BEFORE DRIVING
Turn the indicator selector knob
(2).
Push the indicator selector
knob (2).
NOTE:
Depending on vehicle's specifications,
some items may not be displayed.
How to use the setting mode:
1) When the ignition switch is in "ON"
position or the ignition mode is ON, and
the vehicle is stationary.
2) Push and hold the indicator selector
knob (2) until the display shows
" ".
3) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the chart in
the previous page.
4) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
EXAMPLE
2-73
NOTE:
• As shown in the above illustration, "
indicates on the display of currently set-
ting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display "
" " and then push the indicator
selector knob (2).
Time indication of clock "
• : 12-hour format (default set-
ting)
• : 24-hour format
Central door locking system "
• : Unlock all doors by turning
the key once
• : Unlock all doors by turning
the key twice (default setting)
Door locking and unlocking
buzzer " "(if equipped)
• : Buzzer
doors (including the tailgate)
are locked or unlocked by
using the keyless push start
system remote controller or
request switch (default set-
ting)
: Buzzer does not sound when
the doors (including the tail-
gate) are locked or unlocked
by using the keyless push
start system remote controller
68PM00272
or request switch
Additional flashes of the turn signal
" "
•
" or •
Security system "
" •
•
Tyre pressure monitoring system set-
" ting (if equipped)
•
•
Refer to "Tyre pressure monitoring system
(TPMS)" in "OPERATING YOUR VEHI-
CLE" section for details.
sounds when the
Initialization setting "
•
How to exit the setting mode:
Switch the display to show "
push the indicator selector knob (2).
"
: Turn signal flashes
times after the turn signal
lever is returned (default set-
ting)
: Disable the additional flashes
of turn signal
"(if equipped)
: Enable the security system
(default setting)
: Disable the security system
: Comfort Mode (default set-
ting)
: Load Mode
"
: Initialize all settings
three
" and then