Suzuki SWIFT 2022 Series Owner's Manual page 399

OTHER CONTROLS AND EQUIPMENT
Deletion of speed dial (Del Speed Dial)
Follow the instructions below to delete the
number assigned for the speed dial.
1) Press OFF HOOK button (7).
®
The Bluetooth phonebook menu will
be displayed.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Speed Dials", and press
the knob (1) to determine the selection.
3) Press one of PRESET buttons (3) to
which the number to be deleted is
assigned.
If the number is not registered, "No
Entry" is displayed.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Delete", and press the
knob (1) to determine the selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Del Speed Dial", and
press the knob (1) to determine the
selection.
6) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Confirm", and press the
knob (1) to complete the deletion.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
5-63
Display of device data (Device Name)
Follow the instructions below to display the
®
BD (Bluetooth Device) address and
device name.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Bluetooth Info", and press
the knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Device Name" or "Device
Address", and press the knob (1) to dis-
play the device name or the BD (Blue-
®
tooth Device) address.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
Reset to the factory defaults
Follow the instructions below to reset all
the settings to the factory defaults.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Initialize", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "All Initialize", and press
the knob (1) to determine the selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "All Initialize", and press
the knob (1) to determine the selection.
6) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Confirm", and press the
knob (1) to start the reset.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.