Suzuki SWIFT 2022 Series Owner's Manual page 126

• When you reconnect the negative (–)
terminal to the lead-acid battery, the
value of the total idling stop time and the
total idling fuel saved will be reset.
Clock and date
Date and time are shown. For the setting
procedure, refer to "Setting mode" in this
section.
Motion
EXAMPLE
(14) (15)
This indicates how the center of gravity is
moved while driving.
G (acceleration of gravity) position applied
to the vehicle body while driving is shown
by a globe (14).
When the vehicle is stopped, historical
data of G positions applied to the vehicle
body during the driving is shown as a
graph (15).
G position history graph at the vehicle
stopped can be changed to indicate or
hide. For details, refer to "Setting mode" in
this section.
Do not look in the display while driv-
ing. Doing so may result in an acci-
dent.
NOTE:
• If G position history graph at the vehicle
stopped has been set in indication
mode, the graph (15) is shown for sev-
eral seconds when you turn the ignition
switch to "LOCK" position or change the
ignition mode to LOCK (OFF) after driv-
ing.
• The graph is shown approximately and
the actual movement may differ.
Torque and power
Present engine torque and power are
shown.
52RM218
Accelerator and brake
Present accelerator
degree and brake line pressure are shown.
The display is selectable to indicate or not
to indicate. For details, refer to "Setting
mode" in this section.
WARNING
pedal depressing
BEFORE DRIVING
Boost pressure and engine oil tempera-
ture (if equipped)
EXAMPLE
(16) Boost pressure
(17) Engine oil temperature
Present boost pressure and engine oil
temperature are shown.
WARNING
Do not look in the display while driv-
ing. Doing so may result in an acci-
dent.
NOTE:
The display shows estimated values. Indi-
cations may not be the same as actual val-
ues.
(16)
(17)
52RM233
2-106