Suzuki SWIFT 2022 Series Owner's Manual page 462

Refilling
EXAMPLE
Open
Remove the oil filler cap and pour oil slowly
through the filler hole to bring the oil level
to the upper limit on the dipstick. Be careful
not to overfill the oil. Too much oil is almost
as bad as too little oil. After refilling, start the
engine and allow it to idle for about a min-
ute. Stop the engine, wait about 5 minutes
and check the oil level again.
Changing engine oil and filter
Drain the engine oil while the engine is still
warm.
EXAMPLE
Close
52RM60020
1) Remove the bolts and screws, and then
remove the engine undercover.
INSPECTION AND MAINTENANCE
EXAMPLE
Open
2) Remove the oil filler cap.
3) Place a drain pan under the drain plug.
4) Using a wrench, remove the drain plug
52RM70010 and drain the engine oil.
The engine oil temperature may be
high enough to burn your fingers
when the drain plug is loosened. Wait
until the drain plug is cool enough to
touch with your bare hands.
Close
52RM60030
CAUTION
7-42