Suzuki SWIFT 2022 Series Owner's Manual page 364

mode. The manually selected functions
are maintained, and the other functions
remain under automatic operation.
• If the windshield and/or the front door
windows are fogged, push the defrost
switch (5) to turn on the defroster, or
push the air flow selector (4) to change
the air flow to HEAT & DEFROST posi-
tion to defog the windows.
• To return the blower speed selector (2),
air intake selector (3), and air flow selec-
tor (4) to automatic operation, push
"AUTO" switch (8).
EXAMPLE
(11)
Be careful not to cover the interior tem-
perature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the driver's side dashboard.
These sensors are used by the automatic
system to regulate temperature.
Manual operation
You can manually control the climate con-
trol system. Set the selectors to the
desired positions.
NOTE:
If you need maximum defrosting:
• push the defrost switch (5) to turn on the
defroster (the air conditioning system will
operate and FRESH AIR mode will be
(10)
selected automatically),
• set the blower speed selector to high,
• adjust the temperature selector to "HI"
52RM50420
indication on the display, and
• adjust the side outlets so the air blows
on the side windows.
OTHER CONTROLS AND EQUIPMENT
Models with ENG A-STOP System
• If the heating performance can no longer
perform at a sufficient level due to auto-
matically stopping the engine, press the
ENG A-STOP OFF switch to deactivate
the ENG A-STOP system. (The engine
EXAMPLE
will automatically restart and the air con-
ditioning performance will be restored.)
• If the windshield and/or the driver's side/
passenger
fogged during automatically stopping the
engine, stop the ENG A-STOP system
and restart the engine. Then, turn the air
flow selector (4) to change the air flow to
the HEAT & DEFROST or DEFROST
position to defog the windows.
52RM50320
side door windows are
5-28