Suzuki SWIFT 2022 Series Owner's Manual page 69

BEFORE DRIVING
EXAMPLE
4) Grasp the front of the child restraint and
push the child restraint forcefully to
latch the connecting bars. Check that
they are securely latched by trying to
move the child restraint system in all
directions, especially forward.
5) Attach the top tether strap referring to
"Installation of child restraint with top
tether" section.
When you put your child in the child
restraint system, appropriately slide the
front seat forward not to touch a part of
your child's body.
NOTICE
When installing a child restraint sys-
tem to the rear seat, adjust the front
seat position so that the front seat
does not interfere with the child
restraint system.
2-49
Installation of child restraint with
top tether
CAUTION
If your vehicle is equipped with the
rear head restraint, adjust the height
of the rear head restraint or remove it
for fitting the child restraint, as nec-
essary. However, if a booster cushion
not equipped with the seatback is fit-
ted, the rear seat head restraint
should not be removed. If the rear
head restraint is removed for fitting
54G185
the child restraint, you need to install
it again after removing the child
restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a collision.
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not cause
inconvenience to the occupants.
Front
Some child restraint systems require the
use of a top tether strap. Top tether anchor-
age brackets are provided in your vehicle at
the locations shown in the illustrations.
The number of the top tether anchorage
brackets provided in your vehicle depends
on the vehicle specification. Install the child
restraint system as follows:
EXAMPLE
52RM20180