Suzuki SWIFT 2022 Series Owner's Manual page 234

ENG A-STOP OFF switch
The ENG A-STOP system can be deacti-
vated.
• To deactivate the system, press the ENG
A-STOP OFF switch (1) to turn on ENG
A-STOP OFF light (2).
• To activate the system once again, press
the switch (1) again to turn off the indica-
tor.
• Every time the engine is stopped manu-
ally, the system is enabled again and the
ENG A-STOP OFF light (2) goes off.
(1)
NOTE:
Pressing the ENG A-STOP OFF switch (1)
during the automatic engine stop will
restart the engine automatically and the
ENG A-STOP OFF light (2) will come on.
ENG A-STOP OFF light
This indicator comes on in the information
display.
• This indicator comes on when the ENG
A-STOP system is deactivated.
• The indicator blinks when the ignition
switch is turned to "ON" position or the
(2)
engine switch is pressed to change the
ignition mode to ON, if one of the condi-
tions listed below is met.
The ENG A-STOP system or the SHVS
system does not actuate correctly while
the indicator is blinking. Have the system
inspected by an authorized SUZUKI
dealer.
– There may be something wrong with
the ENG A-STOP system or the SHVS
system.
52RM30170
– An engine component (ISG) or the
lead-acid battery is due for replace-
ment.
OPERATING YOUR VEHICLE
NOTE:
If the indicator blinks during the automatic
engine stop, the engine may shut down.
52RM30460
3-50