Suzuki SWIFT 2022 Series Owner's Manual page 103

BEFORE DRIVING
Selector position (for automatic
transmission or CVT vehicles) /
Gear position (for automatic trans-
mission vehicles) /
Gearshift indicator (if equipped)
The display (D) shows some of the follow-
ing indications.
EXAMPLE
(4)
(6)
(4) Selector position
(5) Gear position
(6) Manual mode indicator
Selector position (for automatic trans-
mission or CVT vehicles) / Gear posi-
tion (for automatic
vehicles)
The display shows the transmission selec-
tor position (4) or the gear position (5).
• For automatic transmission vehicles;
– When the manual mode is not in use,
the display shows the selector posi-
tion.
– When using the manual mode, the dis-
play shows the current gear position.
2-83
Manual mode indicator (for automatic
transmission vehicles)
When you are using the manual mode, the
display shows the manual mode indicator
(6).
Gearshift indicator (if equipped)
Refer to "Gearshift indicator" in "OPERAT-
ING YOUR VEHICLE" section.
(5)
52RS20170
transmission
Trip meter
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter, push and hold the
trip meter selector knob (2) for a while.
NOTE:
The indicated maximum value of the trip
meter is 9999.9. When you run past the
maximum value, the indicated value will
return to 0.0.
Odometer
The display (F) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.