Suzuki SWIFT 2022 Series Owner's Manual page 91

BEFORE DRIVING
(For "L/100km" or "km/L" setting)
To change the unit of average fuel con-
sumption, while pushing and holding the
trip meter selector knob (1), turn the indica-
tor selector knob (2).
EXAMPLE
NOTE:
When you change the units that average
fuel consumption is displayed in, the
instantaneous fuel consumption units will
be changed automatically.
Driving range
If you selected driving range the last time
you drove the vehicle, the display indicates
"---" for a few seconds and then indicates
the current driving range when the ignition
switch is turned to "ON" position or the
engine switch is pressed to change the
ignition mode to ON.
2-71
The driving range shown in the display is
the approximate distance you can drive
until the fuel gauge indicates "E", based on
current driving conditions.
When the low fuel warning light comes on,
the display "---" will appear.
If the low fuel warning light comes on, fill
the fuel tank immediately regardless of the
(Initial
value of driving range shown in the display.
setting)
When you refuel, the driving range is
updated. However, if you only add a small
amount of fuel, the correct value will not be
displayed.
NOTE:
• If you refuel when the ignition switch is in
"ON" position or the ignition mode is ON,
the driving range may not indicate the
68PH02207
correct value.
• When you reconnect the negative (–)
terminal to the lead-acid battery, the
value of driving range will be shown after
driving for a while.
Fuel gauge
The display (F) shows the fuel gauge.
Refer to "Fuel gauge" in this section.