Baby Lock Ellisimo BLSO Service Manual page 60

Adjustment
Repairing or adjusting embroidery unit, check this adjustment.
[Adjustment standard]
In the test mode "23", when pressing the
[Adjustment procedure]
Checking the embroidery center position
1. Remove the presser foot.
2. Attach the embroidery unit to the machine. (Remove embroidery hoop.)
3. Start the test mode, and then select the "23" (Embroidery Max Position mode).
4. Put the embroidery sheet on the embroidery hoop.
5. Attach the embroidery hoop to the embroidery unit.
6. Press the button on the screen. (Move the carriage.)
7. Carriage stops, then turn the pulley by hand and check needle drops in the center of embroidery sheet hole.
8. In case fine, remove embroidery hoop and press the
<To next page>
4 - 32
Embroidery center position (embroidery unit)
button, needle drops in the center of embroidery sheet hole.
button, and turn the power off.
62