Baby Lock Ellisimo BLSO Service Manual page 11

Basics of Disassembly
12
Removal of Front cover assy
1. Remove the screw 1, and then remove the front cover assy. 1.
*Key point
• Remove the hook of the front cover while pushing the arrow 2
of the rear cover, and then remove the hook of the front cover
while pulling the arrow 3 of the rear cover.
• Release the 2 hooks 4 from the base plate assy..
2. Remove the connector 5 from the panel PCB assy. 6.
3. Unlock the lock, and open the clamp assy. 7, and then remove the FFC 8
from the clamp assy. 7.
4. Unlock the connector 9 of the panel PCB assy. 6, and then remove the
FFC 8 from the panel PCB assy. 6.
→
Refer to 3 - 8 "Disassembly of Front cover assy".
2 - 8
Main parts
13
1
2
3
1
4
9 7 8
6 5