Baby Lock Ellisimo BLSO Service Manual page 47

Adjustment
[Adjustment standard]
In the test mode "03", sewing one point pattern, and no overlapping, opening, shifting.
[Adjustment procedure]
1. Attach the N presser foot.
2. Start the test mode, and the select the "03" (Pattern Adjustment mode).
3. Sewing one point pattern with the schappe spun thread #60.
4. Press , to adjust pattern shape is like "OK" below.
OK
NG: 1
NG: 2
NG: 3
NG: 4
4 - 26
One point
No overlapping, opening and shifting.
Overlapping (vertical way), press "Fine
Adjust Verti." .
Opening (vertical way), press "Fine Adjust
Verti." .
Shifting (not align horizontal way), press
"Fine Adjust Horiz." .
Shifting (not align horizontal way) press
"Fine Adjust Horiz." .
49